Product Documentation For Generator Parts

Product Documentation
    Add a header to begin generating the table of contents

    Generator Controller Deepsea DSE701 Wiring Diagram Specification

    The model generator controller DSE701 is an diesel engine Control Module designed to control the engine via a key switch and push buttons on the front panel.

    For more information, please Online Read the PDF file.

    Generator Controller 5110 Instroduction

    For more information, please Online Read the PDF file.

    Generator Voltage Regulator AVR GAVR-8A Specification

    Generator Universal 8 Amp 1/2 Wave Self Excited Dip-Switch Programmalbe Automatic Voltage Regulator AVR GAVR-8A For more information, please Online Read the PDF file.

    Generator Voltage Stabilizer AVR GAVR-12A Specification

    Diesel Genset Universal 7 Amp 1/2 Wave Self Excited Dip-Switch Programmalbe Automatic Voltage Regulator AVR GAVR-12A For more information, please Online Read the PDF file.

    Generator AVR GAVR-15A Specification Circuit Diagram

    Universal 15 Amp 1/2 Wave Self Excited Dip-Switch Programmalbe Automatic Voltage Regulator AVR GAVR-15A For more information, please Online Read the PDF file.

    Generator Electronic Auto Start Controller DSE4420 Specification

    For more information, please Online Read the PDF file.

    Generator Monicon Battery Charger 24V 3.5A CHR1445-2685_Manual

    For more information, please Online Read the PDF file.

    Generator Engine Control Module DSE501K Specification

    For more information, please Online Read the PDF file.

    Diesel Engine Control Unit DSE5120-Data-Sheet

    The DSE5120 is an Automatic Mains Failure Control Module and includes all the features of the DSE5110 plus the ability to monitor a mains (utility) supply. Upon detection of a mains (utility) failure the module automatically starts the generating set. Once the mains power has been restored it instructs the generating set to stop. For more information, please Online Read the PDF file.

    Generator Controller DSE5110-Data-Sheet

    The DSE5110 is an Automatic Start Control Module designed to automatically start and stop diesel and gas generating sets that include non electronic engines. The module also provides excellent engine monitoring and protection features. The module has the ability to monitor under speed, over speed, charge failure, emergency stop, low oil pressure, high engine temperature, fail to start, fail to stop and loss of the speed sensing signal. The module displays fault conditions on the LCD display and via the LED indicators on the front. For more information, please Online Read the PDF file.

    User Manual for Actuator ADC120 Engine Governing Systems

    For more information, please Online Read the PDF file.

    DSE7320 MKII Auto Mains Failure Control Module-data sheet

    DSE7320 is a powerful, new generation Auto Mains (Utility) Failure genset control module with a highly sophisticated level of new features and functions, presented in the usual DSE user-friendly format. Suitable for a wide variety of single, diesel or gas Gen-set applications. For more information, please Online Read the PDF file.

    Half-wave Phase-controlled Thyristor Type Generator AVR SX460

    SX460 is a half-wave phase-controlled Thyristor type Automatic Voltage Regulator (AVR) and forms part of the excitation system for a brush-less generator. In addition to regulating the generator voltage, the AVR circuitry includes under-speed and sensing loss protection features. Excitation power is derived directly from the generator terminals. Positive voltage build up from residual levels is ensured by the use of efficient semiconductors in the power circuitry of the AVR. The AVR is linked with the main stator windings and the exciter field windings to provide closed loop control of the output voltage with load regulation of +/- 1.0%. In addition to being powered from the main stator, the AVR also derives a sample voltage from the output windings for voltage control purposes. In response to this sample voltage, the AVR controls the power fed to the exciter field, and hence the main field, to maintain the machine output voltage within the specified limits, compensating for load, speed, temperature and power factor of the generator. A frequency measuring circuit continually monitors the generator output and provides output under -speed protection of the excitation system, by reducing the output voltage proportionally with speed below a pre -settable threshold. A manual adjustment is provided for factory setting of the under frequency roll off point, (UFRO). This can easily be changed to 50 or 60 Hz in the field by push – on link selection. Provision is made for the connection of a remote voltage trimmer, allowing the user fine control of the generator’s output. For more information, please Online Read the PDF file.

    Generator Voltage Stabilizer Stamford AVR MX321 Specification-Data Sheet

    MX321 is a three phase sensed Automatic Voltage Regulator and forms part of the excitation system for a brush-less generator. Excitation power is derived from a three-phase permanent magnet generator (PMG), to isolate the AVR control circuits from the effects of nonlinear loads and to reduce radio frequency interference on the generator terminals. Sustained generator short circuit current is another feature of the PMG system. The AVR senses the voltage in the main generator winding and controls the excitation to maintain the generator output voltage within the specified limits, compensating for load, speed, temperature and power factor of the generator. Three phase RMS sensing is employed for superior voltage regulation. Adjustable Soft start circuitry is included to provide a smooth controlled build up of generator output voltage. A frequency measuring circuit continually monitors the shaft speed of the generator and provides under-speed protection of the excitation system by reducing the generator output voltage proportionally with speed below a pre-settable threshold. A further enhancement of this feature is an adjustable volts per Hertz slope and voltage recovery time, to improve the response of turbo charged engines. Current limiting may be included to allow control over the amount of sustained short circuit current. Maximum excitation is limited to a safe period by internal shutdown of the AVR output device. This condition remains latched until the generator has stopped. The AVR includes an over-voltage protection feature with internal shutdown of the AVR output device, plus the ability to trip an optional excitation circuit breaker if required. Provision is made for the connection of a remote voltage trimmer, allowing the user fine control of the generator’s output. An analogue input is provided allowing connection to a Newage Power Factor controller or other external device with compatible output. The AVR has the facility for droop CT connection, to allow parallel running with other similarly equipped generators. For more information, please Online Read the PDF file.

    Generator Electric Actuator ACB ADB225 ADC225 Technical Information

    The Generator Electric Actuator ACB 225 Series electric Actuator ACB225 ADB225 ADC225 is a rotary output, linear torque, and proportional servo.

    This electromechanical actuator is typically used as an engine fuel control positioning device.

    For more information, please Online Read the PDF file.

    Generator Controller Deepsea DSE701 Wiring Diagram Specification

    The model generator controller DSE701 is an diesel engine Control Module designed to control the engine via a key switch and push buttons on the front panel.

    For more information, please Online Read the PDF file.

    LSM672 Load Sharing Module Specification

    Engine Electronic Governing System LSM672 Load Sharing Module Specification.
    For more information, please Online Read the PDF file.
     

    Automatic Mains Failure Compact Controller for Stand-by Operating Gen-sets Comap AMF20 AMF25 spec

    Support of engines equipped with Electronic Control Unit (J1939 interface)

    Comprehensive diagnostic messages; SPN/FMI codes; KWP2000 support 

    Automatic or manual start/stop of the gen-set 

    Push buttons for simple control, lamp test 

    Graphic back-lit LCD display 128×64 pixels 

    6 LED indicators 

    Parameters adjustable via keyboard or PC 

    Mains measurements (50/60 Hz): U1-U3, Hz 

    Generator measurements (50/60 Hz): U1-U3, I1-I3, Hz, kW, kVAr, kWh 

    Selectable protections alarm/ shutdown 

    3 phase Generator protections – Over-/under voltage – Over-/under frequency – Current/voltage asymmetry – Overcurrent/overload 

    3 phase AMF function – Over-/under frequency – Over-/under voltage – Voltage asymmetry 

    Configurable analog inputs 

    Battery voltage, engine speed (pick-up) measurement 

    Configurable programmable binary inputs and outputs 

    Warm-up and cooling functions n Generator C.B. and Mains C.B. control with feedback and return timer 

    RS232 interface (AT-LINK CONV cable is necessary for IL-AMF 20) 

    Modem communication support (IL-AMF 25 only) 

    Dimensions 180×120 mm (front panel) 

    Sealed to IP65

    Generator Speed Control Unit ESD5111 Specification

     The ESD5100 series speed control unit is an all electronic device designed to control engine speed with fast and precise response transient load changes.

    For more information, please Online Read the PDF file.

    Generator Controller DSE701 DSE702 Control Panel Specification

    The DSE702 is available in Manual and Auto Start versions including all the features of the DSE701 plus a tamper proof engine hours counter.

    For more information, please Online Read the PDF file.

    Engine Interface Module EIM Plus Series Controller Specification

    The Engine Interface Module is a sealed, engine mounted module that provides switching Relays for the Starter Motor Solenoid, Glow Plug and Fuel Solenoid.

    Each of these circuits is protected with individual automotive fuses mounted in the module.

    Individual LED’s illuminate when each circuit is energized in addition these LED’s greatly aid when fault finding.

    For more information, please Online Read the PDF file.

    Generator Speed Control Unit ESD5111 Circuit Diagram Engine Governoring System ESD5111 Spec for GAC

    The ESC5111 series speed control unit is an all electronic device designed to control engine speed with fast and precise response transient load changes.

    For more information, please Online Read the PDF file.

    Generator Automatic Voltage Regulator AVR R250 Manual PDF

    Generator Automatic Voltage Regulator R250 AVR (for Leroy somer) controls the excitation current according to the alternator’s output voltage. With a very simple conception, the shunt excitation alternator is auto excited with a R250 and excitation alternator does not have a short circuit capacity, voltage regulation: around ±0.5%. For more information, please Online Read the PDF file.

    AS480 AVR Generator SPECIFICATION

    The AVR AS480 is a half-wave phase-controlled AVR which forms part of the excitation structure of the brushless generator. Which also incorporates an interface to the optional excitation boost system(EBS) for the use where short-circuit current safeguarding is required. Positive voltage build up from residual levels is ensured by the use of proficient semiconductors in the power circuitry of the AVR. For more information, please Online Read the PDF file.

    AS440 Generator Automatic Voltage Regulator AVR SPECIFICATION INSTALLATION AND ADJUSTMENTS

    AS440 is a half wave phase controlled Thyristor type AVR and forms part of the excitation system for a brushless generator. The design employs Surface Mount Technology (SMT) for high integration of features in a small footprint AVR. Positive voltage build up from residual levels is ensured by the use of efficient semiconductors in the power circuitry of the AVR. The power and voltage sensing circuits have separate terminals, allowing the excitation power to be derived directly from the stator winding for basic applications or from an auxiliary winding if sustained short circuit performance is required. The AVR is linked with the main stator windings and the exciter field windings to provide closed loop control of the output voltage with load regulation of +/- 1.0%. The AVR voltage sensing terminals continuously sample the output windings for voltage control purposes. In response to this sample voltage, the AVR controls the power fed to the exciter field, and hence the main field, to maintain the machine output voltage within the specified limits, compensating for load, speed, temperature and power factor, of the generator. For more information, please Online Read the PDF file.

    Marathon Electric Digital Voltage Regulator AVR DVR2000E Easy Operation Manual

    The DVR®2000E+ is a microprocessor-based control device that regulates the output voltage of a brushless, ac generator by controlling the current into the generator exciter field. Input power to the DVR®2000E+ is derived from a single phase, multi-pole, high-frequency, permanent magnet generator (PMG).
    The DVR®2000E+ is supplied in an encapsulated package designed for behind-the-panel mounting. The DVR®2000E+ is held in place by thread-forming screws that thread into its plastic shell. The front panel display annunciates regulator status and system conditions. DVR®2000E+ connections are made through four types of connectors:
    • Ten quarter-inch, quick-connect terminals for generator connections
    • Two 12-pin Deutsch (DTC style) connectors for current transformer (CT) and system
    interface connections
    • One 3-pin Amp/Tyco Mini Mate-N-Lok receptacle for CAN bus interface.
    • One 9-pin DB-9 type connector for communication between the DVR®2000E+ and a
    Windows® compatible PC.

    FEATURES 
    DVR®2000E+ has the following features:
    • Three regulation modes: single phase automatic voltage regulation (AVR1), three phase
    automatic voltage regulation (AVR3) and field current regulation (FCR)
    • Preset stability settings
    • Adjustable soft start in AVR1 or AVR3 regulation modes
    • Under frequency (volts/hertz) regulation
    • Three-phase or single-phase generator voltage (RMS) sensing
    • Three-phase or single-phase generator current (RMS) sensing
    • True three-phase power metering
    • Field current sensing
    • Field voltage monitoring
    • Contact inputs for system interface capability
    • Contact output for fault indication
    • Generator paralleling with reactive droop compensation and reactive differential compensation
    • Front-panel human-machine interface (HMI) for status and configuration
    • MODBUS protocol via RS232 for external communication
    • DVR®2000E+ Windows® based software for configuration and monitoring
    • Controller Area Network (CAN) interface with CAN 2.0B J1939 protocol for metering and control
    • “Power on” LED indicator
    • Configurable auxiliary input for metering and control

    For more information, please Online Read the PDF file.

    MX450 Manual Generator Automatic Voltage Stabilizer AVR MX450

    AVR MX450 is a half-wave phase-controlled Thyristor type Automatic Voltage Regulator (AVR) and forms part of the

    excitation system for a brush-less generator. In addition to regulating the generator voltage, the AVR circuitry includes under-speed and sensing loss protection features. Excitation power is derived directly from the generator terminals.

    Positive voltage build up from residual levels is ensured by the use of efficient semiconductors in the power circuitry of the AVR.

    The AVR is linked with the main stator windings and the exciter field windings to provide closed loop control of the output voltage with load regulation of +/- 1.0%.

    For more information, please Online Read the PDF file. 

    Generator Voltage Stabilizer AVR SX440 SX440-A Specification-Data Sheet

    SX440 is a half-wave phase-controlled Thyristor type Automatic Voltage Regulator (AVR) and forms part of the excitation system for a brush-less generator.

    In addition to regulating the generator voltage, the AVR circuitry includes under-speed and sensing loss protection features. Excitation power is derived directly from the generator terminals.

    Positive voltage build up from residual levels is ensured by the use of efficient semiconductors in the power circuitry of the AVR.

    The AVR is linked with the main stator windings and the exciter field windings to provide closed loop control of the output voltage with load regulation of +/- 1.0%.

    For more information, please Online Read the PDF file.

    STAMFORD AVR MX341 AUTOMATIC VOLTAGE REGULATOR AVR SPECIFICATION

    MX341 is a two phase sensed Automatic Voltage Regulator and forms part of the excitation system for a brush-less generator. Provision is made for the connection of a remote voltage trimmer, allowing the user fine control of the generator’s output. An analogue input is provided allowing connection to a Newage Power Factor controller or other external devices with compatible output. The AVR has the facility for droop CT connection, to allow parallel running with other similarly equipped generators. For more information, please Online Read the PDF file.

    MX341 Generator Automatic Voltage Regulator Specification-data sheet

    MX341 is a two phase sensed Automatic Voltage Regulator and forms part of the excitation system for a brush-less generator. Excitation power is derived from a three-phase permanent magnet generator (PMG), to isolate the AVR control circuits from the effects of nonlinear loads and to reduce radio frequency interference on the generator terminals. Sustained generator short circuit current is another feature of the PMG system. The AVR senses the voltage in the main generator winding and controls the power fed to the exciter stator and hence the main rotor to maintain the generator output voltage within the specified limits, compensating for load, speed, temperature and power factor of the generator. Soft start circuitry is included to provide a smooth controlled build up of generator output voltage. For more information, please Online Read the PDF file.
    Shopping Cart
    Scroll to Top