3044195 Governor for Generator EFC Control Unit Speed Controller
$98.00
Substitute Cummins Speed Controller 3044915
Availability: 20 in stock
Video
Governor Card Speed Controller 3044195 For Generator Gensets is rugged enough to be placed in a control cabinet or engine mounted encosure with other dedicated control equipment. If water, mist or condensation may come in contact with controller, it should be mounted certically. This will allow the fluid to drain away from the speed control unit.
| SPECIFICATION: | |
| RPM Stability: | <±0.25% |
| Speed Range: | 1KHz ~ 6.5KHz |
| Thermal Stability: | Max ±0.7% |
| IDLE Regulation: | 260 ±20Hz |
| DROOP Regulation: | Minimum 15Hz ±6Hz/ 1 Amp |
| Maximum:  400Hz ±75Hz/ 1 Amp | |
| External Speed Regulation: | ±200Hz  (with 1 KΩ connected) |
| AUX Input Sensitivity: | 148Hz / 1V., ±10Hz |
| Impedance: | 1MΩ |
| Working Temp Range: | -40 ~ 85 °C |
| ENVIRONMENT: | |
| Working Humidity Range: | Maximum 95% |
| Stocking Temp: | -55 ~ 92 °C |
| Shocking: | 20-100HZÂ Â 500mm/Sec. |
| INPUTÂ POWERÂ PROVIDE: | |
| Voltage: | 12V or 24V |
| Grounding Pole: | Negative pole |
| Power Provide: | 40mA |
| Actuator Continuous Current: | Minimum 1A, Maximum 4.5A |
| MPU: | |
| Signal: | 2Â ~Â 120VÂ RMS |
NOTE: Above-Mentioned parameters are tested with a 3800Hz working frequency.
Reviews
There are no reviews yet.