3062323 Engine Parts K19 Speed Governor 3062323 Generator Control Unit

Video

Description

Engine Parts K19 Speed Governor 3062323 Generator Control Unit is rugged enough to be placed in a control cabinet or engine mounted encosure with other dedicated control equipment. If water, mist or condensation may come in contact with controller, it should be mounted certically. This will allow the fluid to drain away from the speed control unit.

• The product is a full electronic closed loop control design
• Quick and accurate response to instantaneous load changes to control engine speed
• When connected to the matching normally open EFC series electronic actuator and mag-netic speed sensor signals, the engine can be perfectly controlled
• The product can used for Cummins generator with stable performance
• Made of high quality material, durable and long service life

Specification:
Item Type: Governor Speed Control BoardSpeed Stability: Better than 0.25%
Speed Range: 1KHz ~ 6.5KHz
Thermal Stability: Maximum, 0.7%
IDLE Adjustment: 260 &; 20Hz ~ 85% of rated speed
DROOP Adjustment: The minimum position is 15Hz & 6Hz / load current change per ampere
Maximum Position: 400Hz & 75Hz / load current change per ampere
External Speed Adjustment: 200Hz (external 1KΩ)
AUX Input Sensitivity: 148Hz / 1V., &; 10Hz
Impedance: 1MΩ
Operating Temperature Range: -40 ~ 85
Operating Humidity Range: Maximum 95%
Storage Temperature: -55 ~ 92
Vibration: 20-100HZ 500mm / Sec.
Input Power:
Power Supply Voltage: 24V DC battery system
Ground Polarity: Negative
Power Consumption: 40mA
Actuator Continuous Current: Minimum 1A; maximum 4.5A
Speed Sensor Signal: 2 ~ 120V RMS
Note: The above performance parameters are measured at the working frequency of 3800Hz, for reference only