DSE 5110 Auto Start Control Module For Generator Genset DSE5110
Availability: 16 in stock
Substitute Deep Sea 5110 Generator Controller DSE5110
Now in stock for Original purchase
The DSE 5110Genset Controller is an Automatic Start Control Module designed to automatically start and stop diesel and gas generating sets that include non electronic engines. The module also provides excellent engine monitoring and protection features.
DSE 5110 Genset Controller has the ability to monitor under speed, over speed, charge failure, emergency stop, low oil pressure, high engine temperature, fail to start, fail to stop and loss of the speed sensing signal. The module displays fault conditions on the LCD display and via the LED indicators on the front.
Power Supply： 8 to 35 Vdc Continuous
Cranking Dropouts: Able to survive 0 V for 50 mS, providing supply was at least 10 V, before dropout and supply recovers to 5V.
Max Current： Operating 425mA at 12 V & 215mA at 24 V; Standby 250 mA at 12 V & 125 mA at 24 V.
Start Relay Output: 16 Amp DC at supply voltage.
Fuel Relay Output: 16 Amp DC at supply voltage.
Auxiliary Relay Outputs: 5 Amp DC at supply voltage.
Charge Fail / ExcitationRange： 0 V to 35 V
Maximum operating current： 320ma at 12V, 215ma at 24v
Maximum operating current：175ma at 12V, 95ma at 24v
AlternatorInputRange: 15V(L-N) to 333V AC (L- N) absolute maximum
Alternator Input Frequency: 50 – 60 Hz at rated engine speed (Minimum: 15V AC Ph-N)
Magnetic Pick-upVoltageInputRange: +/- 0.5 V to 70 V Peak
Magnetic Input Frequency: 10,000 Hz (max) at rated engine speed
MAINS (UTILITY) SENSING INPUT RANGE： (DSE5220 only) 15V (L-N) to 333V AC (L-N) absolute maximum
MAINS(UTILITY)SENSINGINPUTFREQUENCY： (DSE5220 only) 50-60 Hz
MAINS (UTILITY) & GENERATOR LOADING RELAY OUTPUT：(DSE5220 only) 8A AC 250V
Generator loading Relay Output: 8 Amp AC 250V.
Mains loading Relay Output: 8 Amp AC 250V
Panel Cutout: 220mm x 160mm ( 8.7″ x 6.3″)