DSE 6020MK2 Auto Mains Failure Control Module For Generator Genset DSE6020MK2

Video

Description

The DSE6020 MKII is an Auto Mains (Utility) Failure Control Module developed to provide a wide range of operating and monitoring features for single diesel and gas gen-sets.

• • Support for 0-10 V & 4-20mA oil pressure senders.
  • Large back-lit icon LCD display.
  • Heated display option.
  • 3-phase generator sensing.
  • 3-phase generator and mains (utility) sensing.
  • Breaker control buttons on front fascia.
  • Generator & load power monitoring (kW, kV A, kV Ar, pf).
  • Generator overload protection (kW).
  • CAN, MPU & alternator speed sensing (selectable depending on engine type).
  • Tier 4 CAN engine support.
  • Configurable event log (50).
  • DSE Configuration Suite PC Software.
  • Fuel and start outputs (configurable on CAN).
  • Engine maintenance alarms (3)
  • Start on low battery.

Details

DC SUPPLY

CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous

CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained
during cranking.

MAXIMUM OPERATING CURRENT
100 mA at 12 V, 105 mA at 24 V

MAXIMUM STANDBY CURRENT
60 mA at 12 V, 55 mA at 24 V

MAXIMUM SLEEP CURRENT
40 mA at 12 V, 35 mA at 24 V

GENERATOR & MAINS (UTILITY)

VOLTAGE RANGE
15 V to 415 V AC (Ph to N)
26 V to 719 V AC (Ph to Ph)

FREQUENCY RANGE
3.5 Hz to 75 Hz

INPUTS

DIGITAL INPUTS A to F
Negative switching

ANALOGUE INPUTS A to C
Configurable as:
Negative switching digital input
0 Ω to 480 Ω

ANALOGUE INPUT D
Configurable as:
Negative switching digital input
0 V to 10 V
4 mA to 20 mA
0 Ω to 480 Ω

OUTPUTS

OUTPUT A (FUEL)
10 A short term, 5 A continuous,
at supply voltage

OUTPUT B (START)
10 A short term, 5 A continuous,
at supply voltage

AUXILIARY OUTPUTS C, D, E & F
2 A DC at supply voltage

Find out more generator controls

Similar Products