DSE 701MS Manual Start Control Module For Generator Genset DSE701MS

Video

Description

The DSE701MS  Genset Manual controller  is available in Manual and Auto Start versions, offering an excellent range of engine monitoring and protection features. The module offers inputs to monitor low oil pressure, high engine temperature and overspeed and the manual start version also has a user-defined auxiliary input. Auto Start versions also include an input option for a start signal from a remote location.
When the module detects any of the above faults it will light the warning LED on the front panel.

The  Manual controller DSE701 also has the capability to monitor battery charging by utilizing the WL terminal on the charge alternator. On detecting a battery charging fault, it will light the warning LED on the front panel.

Details

DC PROVIDE
CONTINUOUS VOLTAGE RATING:  8 V to 35 V continuous
CRANKING DROPOUTS:  Able to survive 0 V for 50 mS, providing provide was at least 10 V before dropout and provide recovers to 5 V. This is achieved without the need for internal batteries.
OUTPUTS
START:  Solid state 1.2 A negative grounding terminal
RUN:  Solid state 1.2 A negative grounding terminal
PRE-HEAT:  Solid state 1.2 A negative grounding terminal
GENERATOR
VOLTAGE RANGE:  15 V – 333 V AC (L-N)
FREQUENCY RANGE:  3.5 Hz to 75 Hz
DIMENSIONS
DSE701 OVERALL:  72 mm x 72 mm x 38 mm   (2.8” x 2.8” x 1.5”) Excludes key switch
DSE701 PANEL CUT-OUT:  68 mm x 68 mm  (2.7” x 2.7”)
MAXIMUM PANEL THICKNESS:  8 mm

Similar Products