DSE 5220 Auto (Mains) Utility Failure Generator Controller For Generator Genset DSE5220
Availability: 20 in stock
Substitute Deep Sea 5220 Generator Controller DSE5220
Now in stock for Original purchase
The DSE 5220 AMF Generator Controller designed to automatically start and stop diesel and gas generating sets that include non electronic engines. The module also provides excellent engine monitoring and protection features.
The Dse 5220 Controllerhas the ability to monitor under speed, over speed, charge failure, emergency stop, low oil pressure, high engine temperature, fail to start, fail to stop, under/over generator volts, over current, under/over generator frequency, low/high DC battery volts, low fuel alarm and loss of the speed sensing signal. The module displays fault conditions on the LCD display and via the LED indicators on the front.
Power Supply： 8 to 35V DC Continuous
Cranking Dropouts: Able to survive 0 V for 50mS, providing supply was at least 10V before dropout and supply recovers to 5V without the need for internal batteries.
Max Current: Operating 320mA at 12V, 215mA at 24V; Standby 175mA at 12V, 95mA at 24V
Start Relay Output: 16 Amp DC at supply voltage.
Fuel Relay Output: 16 Amp DC at supply voltage.
Auxiliary Relay Outputs: 5 Amp DC at supply voltage.
Charge Fail / Excitation Range： 0 V to 35 V
Alternator Input Range: 15V(ph-N) to 300V(ph-N) 3 Phase 4wire AC (+20%)
Alternator Input Frequency: 50 – 60 Hz at rated engine speed (Minimum: 15V AC Ph-N)
Mains Supply Input Range: 15V(ph-N) to 300(ph-N) 3 Phase 4wire AC (+20%)
Mains Supply Input Frequency: 50 – 60 Hz at rated engine speed (Minimum: 15V AC Ph-N)
Magnetic Pick-up Voltage Input Range: +/- 0.5 V to 70 V Peak
Magnetic Input Frequency: 10,000Hz (max) at rated engine speed
Operating Temperature Range: -30 to +70°C
Panel Cutout: 220mm x 160mm ( 8.7” x 6.3”)