DSE 701AS Auto Start Generator Controller For Generator Genset DSE701AS

Video

Description (Detailed Specification Download click here)

The model 701/702 is an Engine Control Module designed to control the engine via a key switch and push buttons on the front panel.

The module is used to start and stop the engine and indicate fault conditions,automatically shutting down the engine and indicating the cause of failure by LED,giving true,first up fault annunciation.

Additionally,the Auto start versions of the controller will respond to a remote switched input to begin the start sequence.

Details

Power Supply: 8 to 35 Vdc Continuous

Cranking Dropouts: Able to survive voltage dips during cranking. Without
The need for internal batteries.

Alternator Input Range: 15 – 305 V AC RMS (+20%)

Alternator Input Frequency: 50 – 60 Hz at rated engine speed. (Minimum 75V AC)
Over speed: nominal frequency +14% (+24% Overshoot)

Start Output: Solid State 1.2A negative grounding terminal

Run Output: Solid State 1.2A negative grounding terminal

Pre-heat Output: Solid State1.2A negative grounding terminal

Operating Temperature Range: -30 to +70°C

Find out more generator controls

Similar Products