DSE 702K-AS-HC Auto Start Generator Controller For Generator DSE702-AS DSE702AS

Video

FEATURES

The DSE702 Generator Controller offers an excellent range of engine monitoring and protection features. The Generator Manual Start Control offers inputs to monitor low oil pressure, high engine temperature and overspeed and the manual start version also has a user-defined auxiliary input. Auto Start versions also include an input option for a start signal from a remote location.
When the Generator Manual Control detects any of the above faults it will light the warning LED on the front panel.

The  DSE702AS Controller also has the capability to monitor battery charging by utilizing the WL terminal on the charge alternator. On detecting a battery charging fault, it will light the warning LED on the front panel.

Details

DC PROVIDE
CONTINUOUS VOLTAGE RATING:  8 V to 35 V continuous
CRANKING DROPOUTS:  Able to survive 0 V for 50 mS, providing provide was at least 10 V before dropout and provide recovers to 5 V. This is achieved without the need for internal batteries.
OUTPUTS of DSE702
START:  Solid state 1.2 A negative grounding terminal
RUN:  Solid state 1.2 A negative grounding terminal
PRE-HEAT:  Solid state 1.2 A negative grounding terminal
GENERATOR
VOLTAGE RANGE:  15 V – 333 V AC (L-N)
FREQUENCY RANGE:  3.5 Hz to 75 Hz
DIMENSIONS
DSE702 OVERALL:  72 mm x 72 mm x 38 mm (2.8” x 2.8” x 1.5”)  Excludes key switch
DSE702 PANEL CUT-OUT:  68 mm x 68 mm (2.7” x 2.7”)
MAXIMUM PANEL THICKNESS:  8 mm

KEY FEATURES 
• Manual start and remote start versions
• Remote start input (auto start version only)
• Auxiliary shutdown input (Manual start version only)
• Engine monitoring and protection
• LED indication
• Engine pre-heat
• Front panel mounting

Find out more generator controls

Similar Products