DSE 702K-MS-HC Manual Start Generator Controller For Generator Genset DSE702-MS DSE702MS

Video

Description
The Module DSE702 Genset controller is available in Manual and Auto Start versions, offering an excellent range of engine monitoring and protection features. The module offers inputs to monitor low oil pressure, high engine temperature and overspeed and the manual start version also has a user-defined auxiliary input. Auto Start versions also include an input option for a start signal from a remote location.

When the module detects any of the above faults it will light the warning LED on the front panel.

The Module DSE 702MSGenset Controller also has the capability to monitor battery charging by utilizing the WL terminal on the charge alternator. On detecting a battery charging fault, it will light the warning LED on the front panel.

Details

•Manual start and remote start versions

•Remote start input (auto start version only)

•Auxiliary shutdown input (Manual start version only)

•Engine monitoring and protection

•LED indication

•Engine pre-heat

•Front panel mounting

•Multiple engine parameters are monitored simultaneously

CONTINUOUS VOLTAGE RATING:  8 V to 35 V continuous

CRANKING DROPOUTS:  Able to survive 0 V for 50 mS, providing provide was at least 10 V before dropout and provide recovers to 5 V. This is achieved without the need for internal batteries.

OUTPUTS

START:  Solid state 1.2 A negative grounding terminal

RUN:  Solid state 1.2 A negative grounding terminal

PRE-HEAT:  Solid state 1.2 A negative grounding terminal

GENERATOR

VOLTAGE RANGE:  15 V – 333 V AC (L-N)

FREQUENCY RANGE:  3.5 Hz to 75 Hz

DIMENSIONS

DSE702 OVERALL:  72 mm x 72 mm x 38 mm  (2.8” x 2.8” x 1.5”)  Excludes key switch

DSE702 PANEL CUT-OUT:  68 mm x 68 mm  (2.7” x 2.7”)

MAXIMUM PANEL THICKNESS:  8 mm

Find out more generator controls

Similar Products