DSE 705 Auto Transfer Switch Generator Controller For Generator Genset DSE705

Video

Replace Deep Sea DSE 705 Generator ATS Controller DSE705

FEATURES

The DSE 705 Generator Controller is Transfer Switch Control Module that have been designed to monitor the mains (utility) provide.
When the mains (utility) power fails, the module will send a start request to the generator control unit. When the generator is up and running the module transfers the load across.
When the mains (utility) returns, the module transfers the load back and removes the start command. The generator should then begin its shutdown procedure.

The DSE705  Controller can be configured to follow the users’ pre-set start and stop sequences.

Details

DC SUPPLY

Continuous Voltage Rating： 8 V to 35 V continuous

Maximum Operating Current： 100 mA at 12 V, 105 mA at 24 V

Maximum Standby Current： 60 mA at 12 V, 55 mA at 24 V

Maximum Sleep Current： 40 mA at 12 V, 35 mA at 24 V

Cranking Droputs： Able to survive 0 V for 50 mS, providing supply was at least

10 V before dropout and supply recovers to 5 V

This is achieved without the need for internal batteri
INPUTS

Digital Inputs A to F： Negative switching

Analogue Inputs D： Configurable as:

Negative switching digital input

0 V to 10 V,4 mA to 20 mA,0 Ω to 240 Ω

Analogue Inputs A TO C： Configurable as:

Negative switching digital input:0 Ω to 480 Ω
OUTPUTS

Output A (Fuel)： 10 A short term, 5 A continuous,at supply voltage

Output B (Start)： 10 A short term, 5 A continuous,at supply voltage

Auxiliary Outputs C, D, E &F： 2 A DC at supply voltage

GENERATOR & MAINS (UTILITY)

Voltage Range： 15 V to 415 V AC (Ph to N),26 V to 719 V AC (Ph to Ph)

Frequency Range： 3.5 Hz to 75 Hz