MPU MSP6720 5/8-18 UNF Threaded Generator Speed Sensor
$42.00
Availability: 19 in stock
Video
Speed Sensor MSP6720
MSP6720 is kind of protection equipment for the generators which is connected to the controller to protection the generator operation in normal type. When the generator in unormal level, the sensor will send the signal to the controller then the controller will send warning to make sure you will find the problem was.
Details
5/8-18 UNF Â Threaded Generator Speed Sensor | ||||
Product # |  Thread  Length |  Harness  Length |  Connector |  With  Mating Connector |
MSP674 | 3in [76.2mm] | High Output 913Ω |  Military | No |
MSP675 | 3.19in [81mm] | 7in [178mm] | Flying  Leads | No |
MSP676 | 5in [127mm] | 1ft [0.3m] | Flying  Leads | No |
MSP677 | 3in [76mm] | na | Military | No |
MSP678 | 4.86in [123.4mm] | Â na | Military | No |
MSP679 | 3in [76.2mm] | Â na | Military | Yes |
MSP6710 | 4.86in [123.4mm] | Â na | Military | Yes |
MSP6719 | 2.37in  [60.2mm] | 1ft [0.3m]  Harness | Flying  Leads | No |
MSP6720 | 3.86in [98.1mm] | 1ft [0.3m]  Harness | Flying  Leads | No |
MSP6721 | 3.19in [81mm] | 2.75in [70mm] | Â Automotive | No |
MSP6721C | 3.19in  [81mm] |  2.75in  [70mm] |  Automotive | Yes |
MSP6722 |  2.37in  [60.2mm] |  6in  [152mm] | Push-On  Terminals | No |
MSP6728 | 3.19in [81mm] | 6.25in [159mm] | Packard | No |
MSP6728C |  3.19in  [81mm] | 6.25in [159mm] | Packard | Yes |
MSP6732 | 3.16in [80.3mm] | 3.25in [82.6mm] | Dual  Packard | No |
MSP6732C | 3.16in [80.3mm] | 3.25in  [82.6mm] | Dual  Packard | Yes |
MSP6743 | 3.5in  [89mm] | High Output  1.2kΩ | #8-32NC-2A  Threaded Stud Terminals | No |
Find out more generator MPU Speed Sensor
Similar Products
1 review for MPU MSP6720 5/8-18 UNF Threaded Generator Speed Sensor