MPU MSP6710 5/8-18 UNF Threaded Generator Speed Sensor

(1 customer review)


Availability: 20 in stock

Sharing is caring!

SKU: MPU_MSP6710 Category: Tags: ,


The MSP6710 generator magnetic pickup detects when ring gear teeth, or other ferrous projections, pass the tip of the sensor. Electrical impulses are produced by the sensor’s internal coil and sent to the speed control unit. The signal from the MSP6710 Magnetic Speed Sensor, teeth per second (Hz.), is directly proportional to engine speed. Speed sensors are available in various lengths in both U.S. and metric threads. Wire leads, military connectors, automotive connectors or stud terminals are also available. Over 30 styles currently available.


5/8-18 UNF   Threaded Generator Speed Sensor
Product # Thread   Length Harness   Length Connector With   Mating Connector
MSP6743in [76.2mm]High Output 913Ω MilitaryNo
MSP6753.19in [81mm]7in [178mm]Flying   LeadsNo
MSP6765in [127mm]1ft [0.3m]Flying   LeadsNo
MSP6773in [76mm]naMilitaryNo
MSP6784.86in [123.4mm] naMilitaryNo
MSP6793in [76.2mm] naMilitaryYes
MSP67104.86in [123.4mm] naMilitaryYes
MSP67192.37in   [60.2mm]1ft [0.3m]   HarnessFlying   LeadsNo
MSP67203.86in [98.1mm]1ft [0.3m]   HarnessFlying   LeadsNo
MSP67213.19in [81mm]2.75in [70mm] AutomotiveNo
MSP6721C3.19in   [81mm] 2.75in   [70mm] AutomotiveYes
MSP6722 2.37in   [60.2mm] 6in   [152mm]Push-On   TerminalsNo
MSP67283.19in [81mm]6.25in [159mm]PackardNo
MSP6728C 3.19in   [81mm]6.25in [159mm]PackardYes
MSP67323.16in [80.3mm]3.25in [82.6mm]Dual   PackardNo
MSP6732C3.16in [80.3mm]3.25in   [82.6mm]Dual   PackardYes
MSP67433.5in   [89mm]High Output   1.2kΩ#8-32NC-2A   Threaded Stud TerminalsNo

Find out more generator MPU Speed Sensor

Similar Products

1 review for MPU MSP6710 5/8-18 UNF Threaded Generator Speed Sensor

    April 30, 2021
    The MPU MSP6710 speed sensor is a high quality product that helps me to monitor the operation of my generator engine to avoid malfunctions and damage
Add a review
Review now to get coupon!

Your email address will not be published. Required fields are marked *

Scroll to Top