MPU MSP6719 5/8-18 UNF Threaded Generator Speed Sensor
$48.00
Availability: 20 in stock
Video
The MSP6719 generator magnetic pickup detects when ring gear teeth, or other ferrous projections, pass the tip of the sensor. Electrical impulses are produced by the sensor’s internal coil and sent to the speed control unit. The signal from the MSP6719 Magnetic Speed Sensor, teeth per second (Hz.), is directly proportional to engine speed. Speed sensors are available in various lengths in both U.S. and metric threads. Wire leads, military connectors, automotive connectors or stud terminals are also available. Over 30 styles currently available.
Details
| 5/8-18 UNF Â Threaded Generator Speed Sensor | ||||
| Product # |  Thread  Length |  Harness  Length |  Connector |  With  Mating Connector |
| MSP674 | 3in [76.2mm] | High Output 913Ω |  Military | No |
| MSP675 | 3.19in [81mm] | 7in [178mm] | Flying  Leads | No |
| MSP676 | 5in [127mm] | 1ft [0.3m] | Flying  Leads | No |
| MSP677 | 3in [76mm] | na | Military | No |
| MSP678 | 4.86in [123.4mm] | Â na | Military | No |
| MSP679 | 3in [76.2mm] | Â na | Military | Yes |
| MSP6710 | 4.86in [123.4mm] | Â na | Military | Yes |
| MSP6719 | 2.37in  [60.2mm] | 1ft [0.3m]  Harness | Flying  Leads | No |
| MSP6720 | 3.86in [98.1mm] | 1ft [0.3m]  Harness | Flying  Leads | No |
| MSP6721 | 3.19in [81mm] | 2.75in [70mm] | Â Automotive | No |
| MSP6721C | 3.19in  [81mm] |  2.75in  [70mm] |  Automotive | Yes |
| MSP6722 |  2.37in  [60.2mm] |  6in  [152mm] | Push-On  Terminals | No |
| MSP6728 | 3.19in [81mm] | 6.25in [159mm] | Packard | No |
| MSP6728C |  3.19in  [81mm] | 6.25in [159mm] | Packard | Yes |
| MSP6732 | 3.16in [80.3mm] | 3.25in [82.6mm] | Dual  Packard | No |
| MSP6732C | 3.16in [80.3mm] | 3.25in  [82.6mm] | Dual  Packard | Yes |
| MSP6743 | 3.5in  [89mm] | High Output  1.2kΩ | #8-32NC-2A  Threaded Stud Terminals | No |
Find out more generator MPU Speed Sensor
Similar Products
1 review for MPU MSP6719 5/8-18 UNF Threaded Generator Speed Sensor