MPU MSP675 5/8-18 UNF Threaded Generator Speed Sensor


Availability: 20 in stock

Sharing is caring!

SKU: MPU_MSP675 Category: Tags: ,


The MSP675 generator magnetic pickup detects when ring gear teeth, or other ferrous projections, pass the tip of the sensor. Electrical impulses are produced by the sensor’s internal coil and sent to the speed control unit. The signal from the MSP675 Magnetic Speed Sensor, teeth per second (Hz.), is directly proportional to engine speed. Speed sensors are available in various lengths in both U.S. and metric threads. Wire leads, military connectors, automotive connectors or stud terminals are also available. Over 30 styles currently available.


5/8-18 UNF   Threaded Generator Speed Sensor
Product # Thread   Length Harness   Length Connector With   Mating Connector
MSP6743in [76.2mm]High Output 913Ω MilitaryNo
MSP6753.19in [81mm]7in [178mm]Flying   LeadsNo
MSP6765in [127mm]1ft [0.3m]Flying   LeadsNo
MSP6773in [76mm]naMilitaryNo
MSP6784.86in [123.4mm] naMilitaryNo
MSP6793in [76.2mm] naMilitaryYes
MSP67104.86in [123.4mm] naMilitaryYes
MSP67192.37in   [60.2mm]1ft [0.3m]   HarnessFlying   LeadsNo
MSP67203.86in [98.1mm]1ft [0.3m]   HarnessFlying   LeadsNo
MSP67213.19in [81mm]2.75in [70mm] AutomotiveNo
MSP6721C3.19in   [81mm] 2.75in   [70mm] AutomotiveYes
MSP6722 2.37in   [60.2mm] 6in   [152mm]Push-On   TerminalsNo
MSP67283.19in [81mm]6.25in [159mm]PackardNo
MSP6728C 3.19in   [81mm]6.25in [159mm]PackardYes
MSP67323.16in [80.3mm]3.25in [82.6mm]Dual   PackardNo
MSP6732C3.16in [80.3mm]3.25in   [82.6mm]Dual   PackardYes
MSP67433.5in   [89mm]High Output   1.2kΩ#8-32NC-2A   Threaded Stud TerminalsNo

Find out more generator MPU Speed Sensor

Similar Products


There are no reviews yet.

Be the first to review “MPU MSP675 5/8-18 UNF Threaded Generator Speed Sensor”
Review now to get coupon!

Your email address will not be published. Required fields are marked *

Scroll to Top