MPU MSP676 5/8-18 UNF Threaded Generator Speed Sensor
$49.00
Special Offer
Get 13% off on your second item
* Applies to the same model only
Video
The MSP676 generator magnetic pickup detects when ring gear teeth, or other ferrous projections, pass the tip of the sensor. Electrical impulses are produced by the sensor’s internal coil and sent to the speed control unit. The signal from the MSP676 Magnetic Speed Sensor, teeth per second (Hz.), is directly proportional to engine speed. Speed sensors are available in various lengths in both U.S. and metric threads. Wire leads, military connectors, automotive connectors or stud terminals are also available. Over 30 styles currently available.
Details
| 5/8-18 UNF Threaded Generator Speed Sensor | ||||
| Product # | Thread Length | Harness Length | Connector | With Mating Connector |
| MSP674 | 3in [76.2mm] | High Output 913Ω | Military | No |
| MSP675 | 3.19in [81mm] | 7in [178mm] | Flying Leads | No |
| MSP676 | 5in [127mm] | 1ft [0.3m] | Flying Leads | No |
| MSP677 | 3in [76mm] | na | Military | No |
| MSP678 | 4.86in [123.4mm] | na | Military | No |
| MSP679 | 3in [76.2mm] | na | Military | Yes |
| MSP6710 | 4.86in [123.4mm] | na | Military | Yes |
| MSP6719 | 2.37in [60.2mm] | 1ft [0.3m] Harness | Flying Leads | No |
| MSP6720 | 3.86in [98.1mm] | 1ft [0.3m] Harness | Flying Leads | No |
| MSP6721 | 3.19in [81mm] | 2.75in [70mm] | Automotive | No |
| MSP6721C | 3.19in [81mm] | 2.75in [70mm] | Automotive | Yes |
| MSP6722 | 2.37in [60.2mm] | 6in [152mm] | Push-On Terminals | No |
| MSP6728 | 3.19in [81mm] | 6.25in [159mm] | Packard | No |
| MSP6728C | 3.19in [81mm] | 6.25in [159mm] | Packard | Yes |
| MSP6732 | 3.16in [80.3mm] | 3.25in [82.6mm] | Dual Packard | No |
| MSP6732C | 3.16in [80.3mm] | 3.25in [82.6mm] | Dual Packard | Yes |
| MSP6743 | 3.5in [89mm] | High Output 1.2kΩ | #8-32NC-2A Threaded Stud Terminals | No |
Find out more generator MPU Speed Sensor
Similar Products
Reviews
There are no reviews yet.